The Forté-BG is a durable workhorse using a 54mm flat steel burr, which produces an accurate and precise grind, delivering exceptional cup quality for brew methods from Press Pot to Drip. We re-designed the guts of the Vario-W for commercial use. The Forté-BG design includes a grinding assembly with a threaded burr holder which screws firmly into an all metal grinding chamber for a more accurate grind. A larger gear to belt ratio, combined with a more efficient DC motor, increases the speed of grind and duty cycle.
The Forté-BG allows you to dose by weight or time. Our signature dose-by-weight is accurate to plus or minus .2 gram. The touch activation awakens your screen with LED backlit technology. The touch screen controls all operations with three programmable dose presets; Up or Down arrows to increase or decrease dose values; and TARE, MANUAL, START or STOP.
The Forté-BG grinder comes with 54 mm steel burrs that produce an accurate and consistent grind for a variety of manual and small batch brews. Our steel burrs were specifically designed to reduce the fines, enhancing flavor in the cup. The broad range of grind (500 microns to 1150 microns) and the narrow particle distribution (lack of fines) are the hallmarks of the superiority of the Forté-BG burrs.
An all-metal macro and micro adjustment system produces a positive feel and secure grind setting. The macro-adjust moves from fine to coarse grinding in 10 distinct and repeatable settings. A secondary micro-adjust further divides each of the 10 macro steps into 26 distinct settings. These steps, plus the new metal detents, enable fine-tuning with ease, dialing in the exact grind for the preferred brew method being used.
The hopper holds approximately 300g of coffee. An innovative bean shutoff feature in the collar permits no-mess, no-fuss hopper removal for changing out beans. Bean “waste” (below the stopper) averages a surprisingly low 10g, once the hopper has been shut off (all weights are bean density dependent). A hopper extension is available that can add an additional 250g of capacity.
The Forté-BG is calibrated at the factory to ensure an accurate range of grind. If necessary, the Forté-BG burrs can be easily re-calibrated using the special calibration tool that comes with the grinder.
Burrs can easily be removed for cleaning using the cast zinc tool that is included with your Forté.
Hopper extender: An extension that can add 250g of capacity to the existing 300g bean hopper. Several extenders can be added to get to the capacity you need.